Distributor

C C Jensen Elements

Home CC Jensen Transformer Service Downloads

FILTER INSERTS A

 

The CJC™ A Filter Inserts consist of bonded discs. Main ingredient is wood cellulose.
APPLICATION
The type A Filter Insert is ideal for fine filtration of mineral and synthetic based

FILTRATION CAPABILITY
All CJC™ Filter Inserts have an oil filtration degree of 3 Ám (micron) absolute. This means that 98.7% of all solid particles larger than 3 Ám and approximately 50% of all particles larger than 0.8 Ám are retained in one pass.

  • Engine lube oils
  • Turbine lube oils
  • Hydraulic oils
  • Gear oils
  • Honing oils
  • Quenching oils

A-inserts have a high dirt holding capacity:
A 27/27 Insert = 2.5 litres of dirt
A 38/20 Insert = 2.5 litres of dirt
The water absorption capacity:
Up to 50% of the total contaminant holding capacity.

: Insert A 27/27; Insert A 38/20 CJC Fine Filters Overview (286 Kb)

FILTER INSERTS B

 

CJC™ B Filter Inserts consist of bonded discs made from cellulose and cotton linters.

APPLICATION
B Filter Inserts are manufactured especially for CJC™ Filters used for filtration of mineral oil based

  • Lubricating oils
  • Hydraulic oils
  • Turbine lubricating oils
  • Gear oils
  • Honing oils
  • Rolling oils

Dirt holding capacity:
B 15/25 Insert = 1.5 litres of dirt
B 27/27 Insert = 4.0 litres of dirt

Water absorption capacity:
Up to 50% of the total contaminant holding capacity.

 Insert B 27/27

FILTER INSERTS BM 27/27

 

CJC™ BM 27/27 Filter Inserts are manufactured especially for CJC™ Filters employed in cement mill gear applications, using either mineral or synthetic gear oils.

The BM Insert is widely applicable and is ideal in all types of CJC™ Filters mounted on FLS Symetro Gears.

FILTRATION CAPABILITY
All CJC™ Filter Inserts have an oil filtration degree of 3 Ám (micron) absolute. This means that 98.7% of all solid particles larger than 3 Ám and approximately 50% of all particles larger than 0.8 Ám are retained in one pass.

The dirt-holding capacity of a new BM 27/27 Filter Insert is 4.0 litres, which is double the capacity of its predecessor, the A 27/27 Filter Insert.

The water absorption potential is up to 50% (i.e., 2,000 ml H20) of the total contaminant holding capacity.

 Insert BM 27/27

FILTER INSERTS BNK 27/27

 

BNK 27/27 Filter Inserts are manufactured especially for CJC™ Filters employed in the filtration of insulating oils in tap changers for efficient particle and water removal.

BNK Inserts are dried especially for optimal water and dirt-holding capacity.
The insert is mounted with a strainer in the centre hole.

FILTRATION CAPABILITY
All CJC™ Filter Inserts have an oil filtration degree of 3 Ám (micron) absolute. This means that 98.7% of all solid particles larger than 3 Ám and approximately 50% of all particles larger than 0.8 Ám are retained in one pass.

The dirt-holding capacity of a new BNK 27/27 Filter Insert is 4.0 litres.
The water absorption potential is up to 50% (i.e., 2,000 ml H20) of the total contaminant holding capacity

 Insert BNK 27/27

FILTER INSERTS BLA 15/25

 

CJC™ BLA 15/25 Filter Inserts are manufactured especially for CJC™ Filter Separators employed in the filtration of mineral-based oils of up to ISO VG 150 cSt and are typically used for

  • Hydraulic oils
  • Turbine lubricating oils
  • Gear oils
  • Diesel oils

FILTRATION CAPABILITY
All CJC™ Filter Inserts have an oil filtration degree of 3 Ám (micron) absolute. This means that 98.7% of all solid particles larger than 3 Ám and approximately 50% of all particles larger than 0.8 Ám are retained in one pass.

The dirt-holding capacity of a BLA 15/25 Insert is 1.5 litres of evenly distributed solids.

Unlike BG Filter Inserts, the BLA 15/25 will not permanently hold water as its free passage is integral to the water separation process.

 Insert BLA 15/25 Insert BLA 27/27

FILTER INSERTS BLDA 15/25

 

CJC™ BLDA 15/25 Filter Inserts are manufactured especially for CJC™ Filters employed in the filtration of Water Glycols.
FILTRATION CAPABILITY
All CJC™ Filter Inserts have an oil filtration degree of 3 Ám (micron) absolute. This means that 98.7% of all solid particles larger than 3 Ám and approximately 50% of all particles larger than 0.8 Ám are retained in one pass.

The dirt-holding capacity of a BLDA 15/25 Insert is 1.5 litres of evenly distributed solids.

 Insert BLADA 15/25

FILTER INSERTS BLA 27/27

 

CJC™ BLA 27/27 Filter Inserts are manufactured especially for CJC™ Fine Filters employed in the filtration of water glycols and water-contaminated oils, where water is removed by other means:

  • Hydraulic oils
  • Lubricating oils
  • Gear oils

FILTRATION CAPABILITY
All CJC™ Filter Inserts have an oil filtration degree of 3 Ám (micron) absolute. This means that 98.7% of all solid particles larger than 3 Ám and approximately 50% of all particles larger than 0.8 Ám are retained in one pass.

The dirt-holding capacity of a BLA 27/27 Insert is 4.0 litres of evenly distributed solids.

Unlike B Filter Inserts, the BLA 27/27 will not permanently hold water as its free passage is integral to the water separation process.

  Insert BLA 15/25 Insert BLA 27/27

FILTER INSERTS BLAT 27/27

 

CJC™ BLAT 27/27 Filter Inserts are manufactured especially for CJC™ Filter Separators employed in the filtration and water separation of mineral-based oils of up to ISO VG 150 cSt and are typically used for

  • Hydraulic oils
  • Turbine lubricating oils
  • Gear oils
  • Diesel oils

FILTRATION CAPABILITY
All CJC™ Filter Inserts have an oil filtration degree of 3 Ám (micron) absolute. This means that 98.7% of all solid particles larger than 3 Ám and approximately 50% of all particles larger than 0.8 Ám are retained in one pass.

The dirt-holding capacity of a BLAT 27/27 Insert is 4.0 litres of evenly distributed solids.
Unlike B Filter Inserts, the BLAT 27/27 will not permanently hold water as its free passage is integral to the water separation process.

FILTER INSERTS BLDA 27/27

 

CJC™ BLDA 27/27 Filter Inserts are manufactured especially for CJC™ Filters employed in the filtration of Water Glycols.
FILTRATION CAPABILITY
All CJC™ Filter Inserts have an oil filtration degree of 3 Ám (micron) absolute. This means that 98.7% of all solid particles larger than 3 Ám and approximately 50% of all particles larger than 0.8 Ám are retained in one pass.

The dirt-holding capacity of a BLDA 27/27 Insert is 4.0 litres of evenly distributed solids.

EC / EO / EL Inserts

 

CJC™ ion exchange inserts (fuller's earth, activated alumina, ion-exchange resin) are used for neutralising acidic compounds in fluids such as transformer oil, gas engine oil or phosphate esters.

Among other things, ion exchange filter inserts:

  • Reduce of total acid number (TAN)
  • Increase surface tension
  • Reduce the power factor (tan delta)
  • Increase the breakdown voltage

Reducing oil acidity extends oil lifetime and reduces the fluid systemĺs ageing and wear and tear.

The amount of acid-reducing filtration material needed to restore oil varies from oil to oil. Among other things, this depends on water content, oil temperature and particle contamination levels.

Filtered transformer oil can be expected to reach levels equal to or better than standards for new oil.

Filtered gas engine oil can be expected to result in reduced TAN, thereby extending oil change intervals. Combined with a fine filter, Si-levels will also be reduced.

APPLICATION

Ion exchange inserts work by adsorbing acidic compounds from the oil. They consist of a polyester needle felt filled with granulated fuller's earth, activated alumina or ion-exchange resin beads.

The ion exchange inserts should be used in conjunction with a type A or B CJC™ Filter Insert.

  • The CJC™ EC Filter Inserts consist of fuller's earth / Attapulgus clay, a natural product used for acid neutralisation since 1966.
  • The CJC™ EO Filter Inserts consist of aluminium oxide, a synthetic product first used in 1970.
  • The CJC™ EL Filter Inserts consist of molecular sieve made of a weak alkaline anion resin.

FILTER INSERTS F 27/27

 

CJC™ F 27/27 Filter Inserts are manufactured especially for CJC™ Filter Separators employed in the filtration and water separation of mineral-based fuels, typically

  • diesel oils
  • gas oils

FILTRATION CAPABILITY
All CJC™ Filter Inserts have an oil filtration degree of 3 Ám (micron) absolute. This means that 98.7% of all solid particles larger than 3 Ám and approximately 50% of all particles larger than 0.8 Ám are retained in one pass.

The dirt-holding capacity of an F 27/27 Insert is 4.0 litres of evenly distributed solids.

F 27/27 Filter Inserts will not permanently hold water as its free passage is integral to the water separation process.

Please take a look at our A- and B- filter inserts for water absorption abilities.

Dirt-holding capacity:
F 15/25 Insert = 1.5 litre of evenly distributed solids.
F 27/27 Insert = 4.0 litres of evenly distributed solids.
F 27/27 Filter Insert will not permanently hold water as its free passage is integral to the water separation process.
Please take a look at our A- and B- filter inserts for water absorption abilities.

DMA-Inserts

 

CJC™ DMA Filter Inserts are ideal for fine polishing of bilge water and other types of oil-contaminated process and wastewater.

These filter inserts can attain an oil-in-water contamination level of less than 5 ppm on the exit side.
After polishing, the water is clean enough for discharge or reuse in other work processes.

FILTRATION CAPABILITY
All CJC™ DMA Filter Inserts have an oil-holding capacity of 2.0 - 2.5 kg.
Upon reaching saturation, the inserts will start to release oil particles again.

The combination of structure and material makes the insert extremely effective in absorbing even emulsified oils.

 CJC Oil Absorbent Filter Brochure (257 Kb)

 

 

 CJC Filter Separators Brochure (280 Kb)

 

 CJC Oil Management Solutions Brochure (867 Kb)

 CJC Industry Oil Management Solutions Brochure (867 Kb)

 CJC Oil Contamination Brochure (339 Kb)